2x16PLC – Passive Optical Power Management Component
2x16PLC is a passive optical power management component based on planar lightwave circuit technology used to separate or combine optical signals. It is available unterminated or with your choice of fiber optic connector.
This FTTH distribution box is designed as the termination point for feeder cable to connect with drop cable in FTTx communication network systems. It can load 24pcs LC, SC, FC and ST adapters.
Product Description
The 2x16PLC is a passive optical power management component based on planar lightwave circuit technology. It separates or combines optical signals and it provides low insertion loss, low PDL and high reliability. It is suitable for FTTx, GPON, EPON and CATV system as well as fiber optic equipment.
It consists of a v-groove fiber array chip with ribbon fibers aligned and bonded together and then packed inside a miniature housing. Its performance is excellent and it meets industry standards YD/T893 and YD/T1117.
This passive fiber splitter is designed to fit 1RU 19” standard rack mount cabinets, reducing installation time on site. All ports are open-ended for future splicing and are compatible with LC/APC connectors, SC/APC, LC/UPC, FC/APC and SC/ST/APC connectors.
It is commonly used to connect the Central Office and terminal apparatus for uniform optical signal distribution in FTTH Passive Optical Networks (EPON and 2×16PLC GPON). This passive optical power splitter also works with other broadband service applications. It is made of the highest quality Corning clearcurve bend insensitive fiber for the best possible performance.
Product Specifications
The 2x16PLC rack mount PLC fiber splitter is a passive optical power management device based on planar lightwave circuit (PLC) technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity. It is widely used in FTTH Passive Optical Network to realize optical signal power splitting.
It is available in a 1U 19” rack mount enclosure with various adapter options to meet your specific requirements. It is made of 900um loose tube single mode fiber with high performance and excellent stability, providing an efficient optical signal distribution solution for your network setup.
We also provide bare fiber PLC splitter that is not terminated with fiber optic connectors, which can be spliced into optical distribution cables and drop cables. It can save valuable installation time and reduce damage to pigtails due to improper construction or storage.
We offer various type of fiber PLC splitters including fan out PLC, cassette box PLC and insert type PLC. All of these products are manufactured to the highest standards, smart home and are backed by an industry leading lifetime warranty. If you have any questions about our products, please do not hesitate to contact us. Our friendly and knowledgeable staff are always happy to assist you with your fiber optic splitter needs. We look forward to hearing from you soon!
Product Advantages
2x16PLC is a passive planar lightwave circuit splitter using silica optical waveguide technology to distribute optical signals accurately and evenly. It is commonly used in FTTH Passive Optical Networks such as EPON and GPON for uniform optical signal distribution from the central office to customer premises.
It can be mounted in a 19” standard integrated distribution cabinet or network cabinet to save space. This rack mount PLC fiber optic splitter patch panel is pre-assembled, which reduces installation time on site and improves reliability. It is also waterproof and rainfall resistant to protect the passive optical components inside from damage by rain and other environmental factors.
HYC offers a wide variety of PLC splitters in different split ratios and packages to meet your requirements. These PLC splitters can be either unconnectorized (bare) or connectorized with a choice of single-mode fiber optic connectors. All of them are UL Listed and manufactured with high-quality raw materials to ensure the product stability and reliability. For your convenience, we also offer a cassette type PLC splitter which can be installed in an insert box and rack to allow for easier on-site installation and maintenance management.
Product Requirements
2x16PLC is a 1RU rack mount passive PLC splitter patch panel with a standard size for easy installation. It combines fiber splicing, distribution, termination, patching and storage within one unit, saving installation time and space on the wall or in cabinet. It is a passive component used in FTTx projects as well as CATV and data communication centers. This rack PLC splitter features SC/APC adapters for convenient operation, and all the connectors are pre-loaded on the front of the panel for quick connection. This passive PLC splitter is designed to satisfy Telcordia GR-1209 and GR-1221 requirements.
Bare fiber PLC splitter is a passive optical power management component based on silica optical waveguide technology for distributing optical signals to multiple destinations in an FTTH network. It is an essential component in FTTx Passive Optical Network (PON) applications such as EPON and GPON deployments. This bare fiber splitter is available unterminated or terminated with your choice of LC/APC, FC/APC, SC/APC, ST/APC, and other connector types.
This insertion module fiber optic PLC splitter is an ideal solution for FTTx construction. It can be easily installed in the optical distribution box and network cabinet, connecting Central Office with terminal apparatus for uniform optical signal distribution. It is also commonly used in CATV links as well as other passive optical networks such as GPON.
