Blockless Mini PLC Splitters With No Connectors
PLC splitters (Planar Lightwave Circuit) are advanced optical power management devices fabricated using silica optical waveguide technology. They are used for distributing optical signals from central office to multiple premise locations in FTTH Passive Optical Network (PON) systems.
This blockless mini PLC splitter has one input and sixteen output ports, each port is assigned 6.25% of the total power. It is packaged in a stainless steel module with standard 900um loose tube single-mode fiber.
1. Low insertion loss
Blockless mini PLC splitters are often used in FTTH projects because they leave bare fiber on all sides and can be spliced freely by network engineers. They are designed to require the least space during cabling and can be installed in FTTH box, patch panel or ABS cassette easily.
Besides, they have low insertion loss which is a critical factor in FTTX network system. Recent advancements in technology have focused on reducing insertion losses in order to improve overall system performance. These advances include improved components and manufacturing processes blockless-mini-plc-splitters-no-connectors that reduce scattering and reflection losses. These improvements can also lead to lower insertion loss values in particular wavelength ranges.
The insertion loss of a PLC splitter is determined by its optical component design and manufacturing processes, which are typically optimized for a particular wavelength range. It is also influenced by the number of output ports and the splitting ratio. In general, higher insertion loss results in a worse performance in a specific wavelength range.
The insertion loss of a PLC can be improved by minimizing the scattering and reflection losses of the optical components and by using high-quality materials. Moreover, the PLC splitting ratio can be adjusted to achieve a desired balance between power distribution and transmission efficiency. At mefiberoptic, we offer a wide variety of 1xn and 2xn blockless PLC splitters with different splitting ratio such as 1×2, 1×4, 1×8, 1×16, 1×32, 1×64 and more.
2. Compact size
The PLC fiber optical splitter is a micro-optical component that separates or combines optical signals. It is based on planar lightwave circuit technology and provides a cost-effective light distribution solution with small form factor and high reliability. It consists of two silica glass waveguide circuits that are aligned with a v-groove fiber array chip that uses ribbon fiber. The entire assembly is bonded and packaged inside a miniature housing. This allows the PLC to maintain excellent performance, including low insertion loss, low input polarization sensitivity, and low PDL.
Blockless mini PLC splitters are compact in size, and are the ideal choice for FTTH applications that require minimal space. They are available in a wide range of split ratios, including 1×2, 1×4, 1×8, and 1×16. These splitters can be used in a variety of connection and distribution products, such as FTTH boxes and network cabinets.
These splitters are also a popular choice for connecting LANs to local area networks (LANs). They provide a convenient way to distribute signals between different buildings, offices, and work areas. The splitters can be easily installed on the wall, in racks, or other locations. These splitters are also highly reliable, and can withstand harsh environments. They are often made of high-quality materials, which makes them an excellent choice for your LAN. They also come with a variety of connectors, so you can choose the ones that fit your network’s requirements.
3. Easy to splice
PLC splitters divide an optical signal into multiple outputs by applying a precise splitting ratio. This allows the signal to be distributed evenly to all the output ports. The result is high reliability and low insertion loss. This is why it is widely used in FTTH and other projects. We offer a variety of 1xN and 2xN blockless fiber type PLC splitters with 0.9mm loose tube output. All the products are based on planar light wave circuit technology. The 1xN and 2xN PLC splitters are precision aligned to achieve high performance and stability.
Bare fiber PLC splitter has bare fibers on all the ends, which can be spliced by network engineer freely according to the applications. It requires less space during cabling. It is commonly used in FTTH and FTTx projects.
Micro steel tube PLC splitter has the same appearance as bare fiber PLC splitter, but it uses a compact stainless tube package to provide stronger fiber protection and its fiber ends are terminated with connectors Borosilicate (commonly with SC, LC, FC and ST types). It can be installed in a fiber optic splice closure or optical terminal distribution box easily to provide FTTH signal distribution.
TANGPIN Technology is a professional manufacturer of FTTH equipment and we guarantee every product to customers is strictly tested before shipment. Our products have a wide range of applications, including FTTH, PON, LAN, CATV and test instruments.
4. Easy to connect
PLC splitters are essential passive components used for optical power allocation from the central office to customer premises in FTTH/FTTHx networks. They adopt silica optical waveguide technology to divide an input signal into multiple output signals. Blockless fiber optic PLC splitter is a popular model that leaves bare fiber on both ends, so it can be spliced freely by network engineers and installed in the fiber closure easily for FTTH signal distribution.
Tarluz provides a series of 1xN mini blockless PLC splitters, which are tailored for specific applications. They have high reliability and meet Telcordia 1209 and 1221 reliability requirements. In addition, they have a wide operating wavelength range, high channel-to-channel uniformity and compact size.
We offer both tray type and LGX box type mini PLC splitter to satisfy different cable management requirements. LGX box type PLC splitter looks like an MTP LGX cassette that can be mounted in the standard fiber enclosures and patch panels for more efficient cabling. Its connector ports are clearly marked, which can help reduce the fault rate caused by wrong connection.
Our tray type mini PLC splitter is similar to an MTP cassette, but it has a space saving package form factor and can be placed in the standard 19-inch fiber rack chassis for easy installation. Its connector ports are clearly marked, so they can be connected to the appropriate inbound and outbound pigtails.
