Getting the Most Out of Your Dimmable Motion Sensor Provider
Motion sensors have always been a handy way to control your lights. But smart motion sensor technology promises to take that utility to a whole new level.
The Hue sensor is a great example of this, offering three levels of motion sensitivity and allowing you to configure them in the same app that controls your light bulbs.
Detection Range
Detection range is the distance that a motion detector can detect movement before it triggers an alarm. Generally, PIR (Passive Infrared) sensors use infrared light to detect changes in heat level and interpret them as an object moving across the detector’s field of view.
Depending on where you place your sensor, the detection range can vary from 20 feet to 100 feet. A dimmable motion sensor provider will be able to show you dimmable motion sensor provider the detection range of their product so that you can make an informed decision on how it will work in your home.
Most motion lights are based on PIR sensors, which measure changes in heat level. The detector works best when an object moves across its field of view, such as a warm body sweeping past the light. Depending on the sensor model, you can adjust how quickly it needs to change the heat level to be interpreted as motion.
You can also set the sensitivity of the sensor to determine how bright the light should be for your situation. This is particularly useful if your light is used to illuminate your home’s entranceway, but you want it to also help prevent trips and falls. A brighter motion light would be more suitable for a home with multiple steps or objects.
You can also set the off delay timing on your motion detector, which is useful if you need to turn it off after a certain amount of time. The lux setting is another adjustable feature that allows you to control the light intensity for different situations. If you need your motion detector to operate only during the night, for example, you can set the lux value to 2.
Sensitivity Settings
If you are looking to get the most out of your dimmable motion sensor provider, consider adjusting their sensitivity settings. The sensitivity setting is controlled by a slider and can be set anywhere from 1 to 50, with the higher the number the more sensitive the detection. It is a good idea to test the device in different time periods so that you can determine the optimal sensitivity setting for your needs.
In addition to the sensitivity setting, you can also adjust other factors such as the ramp rate that a Z-Wave command sends to change the light level. Most people are used to 3 second ramp rates but you can program a significantly longer ramp to give an occupant enough time to override the dim level, whether by pressing a button or waving their hands in front of the motion sensor.
The best sensitivity setting for your needs is probably the one that gives you the most options when it comes to how and when your lights will turn on and off. The motion detector is an essential part of any home security system and you want to be able to control it as much as possible. You can do this by adjusting the sensor’s sensitivity and other settings, and you will find that your new smart home device will be more responsive to your needs than ever before.
Notification Settings
Motion sensors have many features, but one of the most opulent is the ability to fine tune your notification settings. This feature can be a bit finicky, but a little bit of effort will go a long way in reducing your monthly energy costs and keeping your home safe at the same time.
The most important setting is the timeout – this setting controls how long the lights stay on after motion is detected. Using this feature will save you money on electricity and keep your home safer at night.
Taking this a step further, you can set the timeout for a specific room or even a specific area such as your front porch. It is also possible to configure your dimmer to turn the light on when motion is detected and off again when it is not, a great idea for areas with low ceilings or where you are in an enclosed space.
You can even program a light dimmer to show you an animation that tells you the time it takes for the lights to turn on and off. This is the perfect solution for rooms with limited access, or for occupants who don’t want to be disturbed by the occasional visitor.
Installation
If you want to add a dimmable motion sensor to your home, it’s important to dimmable motion sensor provider learn how to install it correctly. This will ensure that the light is only illuminated when you need it, and will help to reduce your energy costs.
There are several different types of dimmable motion sensors available on the market, and each can be adjusted to meet specific needs. These options include detection area, hold time, and standby period, which can be customized through the use of DIP switches.
The Philips Dynalite DUS360CR-DA is a recess mountable 360 degree ceiling-mount motion sensor that combines motion detection (PIR), infrared remote control reception (IR) and ambient light level detection (PE) into one device. The device has a low profile design and offers easy installation through the use of dipswitches for area addressing, no-motion time-out and other advanced features.
It can be used to automate lighting in your office, gym, or other space using high bay LED fixtures. It can also be used for safety and security purposes by detecting movement after hours and automatically turning the lights on and off.
This sensor is designed to replace existing light fixtures with LED lighting, and can be used in conjunction with other devices such as switches or dimmers to create a complete smart lighting system. It is compatible with LED diodes and comes with potentiometers for regulation of lighting time and sensitivity of light intensity.
If you are installing the device in a high bay light fixture, it is important to understand how to connect the wires between the device and the fixture. First, you need to locate the circuit breaker supplying power to the lighting circuit in the electrical box. You should turn off the circuit before you begin to work on it, as a safety precaution.
Next, you will need to remove the switch plate from the light switch you wish to install the dimmable motion sensor device in. Most switch plates are fastened with small standard slot machine screws. If the switch plate has locking tabs between the top and bottom plates, use a screw driver to pry it open.
