Waterproof Irrigation Wire Connectors
Waterproof wire connectors are an essential part of your irrigation system waterproof irrigation wire connectors and any other electrical installation that may be subject to moisture exposure. They protect against corrosion and guarantee a lasting electrical connection.
EZ Decoders and all above-grade solenoid and sensor wiring connections should be made with waterproof irrigation wire connectors. These are easy to install and come pre-filled with dielectric silicone sealant that never hardens.
Easy Seal
Easy Seal waterproof wire connectors are the easiest way to create a waterproof connection. They are the perfect solution for irrigation valves and other outdoor wiring. Simply strip the wires and twist the connector on – no heat shrink, tape or mastics required. Available in 3 various sizes to suit any project. Each cap is filled with grease to keep out moisture and ensure a watertight seal.
Corrosion is a risk anywhere water and metal are in contact, including wet and damp locations like your sprinkler system. With the Easy Seal or Grease Tube, you can prevent corrosion and failure of your irrigation system by creating a watertight seal at the connection point.
Using the waterproof nut connector is simple and fast, just remove the cap, insert the stripped wires, and twist. The silicone filler keeps the connectors water and dirt-free, eliminating the need for time consuming products like tape, heat shrink, mastics or corrosion kits. Always turn off the power before installing or removing a wire nut connector, and use in accordance with local and national codes.
Grease Tube
If you’re looking for a convenient solution to protect your sprinkler systems from corrosion, then the Grease Tube waterproof irrigation wire connectors are a great option. They come in a convenient storage box and are easy to use with no need for crimp tools or soldering machines. Plus, they provide a long-lasting connection of valve and controller wires, even under wet conditions.
Simply push the solenoid and controller wires into the grease tube, twist, and lock into place. This helps to prevent any accidental removal of the connectors, which could potentially result in the failure of the system. The silicone gel inside the grease tube helps to prevent any water leaks and is able to withstand a 600-volt surge.
This kit includes a total of 220 butt connectors in four different colors and sizes. It also features a transparent plastic box for easy organization. This kit is ideal for automotive, marine, and household applications. The heat-shrinkable design provides insulation and improves pullout strength, while the tinned copper tube enhances conductivity.
The MUYI 10 Kit 2 Pin Waterproof Connector is a durable and reliable solution for wiring harness connections. This product offers a high-quality waterproof design and a temperature range of -10 to +80 degrees Celsius. Additionally, this product is UL and CE certified for safe and effective operation.
DryConn Blue/Blue
King Innovation Blue Low Voltage Waterproof Connectors are a great solution for making low voltage irrigation splices, and they’re corrosion and water proof. They’re pre-filled with a dielectric silicone sealant waterproof splice connectors that never hardens. These large, direct bury connectors are UL 486D listed and are ideal for use in damp, wet, rain tight or submersible locations. They’re easy to install with a simple one step process, and no pre-twisting is required. They’re suitable for connecting up to (2) #12 wires and can handle a maximum of 600V building wire, or 1000V for signs and luminaries. Choose from a (12) pack or (50) pack.
Blazing
Blazing is a company that has been around for over 8 years with a clear focus and goal to make wire connectors that are easier to use and provide more moisture protection and wire restraint than other wire connectors. Their SnapLoc waterproof connectors are ideal for low voltage landscape lighting and irrigation applications. The connectors are easy to install and come pre-filled with petroleum grease. Simply strip the wires 3/4″ and group bare ends together, then push the inner sleeve into the outer sleeve until it’s double-locked. The pre-filled silicone fully encapsulates the bare wires and closes all entryways against moisture and corrosion. The connectors are vibration-proof and never dangle. The connectors are also backed by a lifetime warranty. They can be used on both solid and stranded wires.